hide
Free keywords:
Twin; Ultrafine grain; Ultrahigh strength
Abstract:
Abstract An ultrafine-grained 304 austenitic 18 wt.% Cr-8 wt.% Ni stainless steel with a grain size of ∼270 nm was synthesized by accumulative rolling (67% total reduction) and annealing (550°C, 150 s). Uniaxial tensile testing at room temperature reveals an extremely high yield strength of 1890 ± 50 MPa and a tensile strength of 2050 ± 30 MPa, while the elongation reaches 6 ± 1%. Experimental characterization on samples with different grain sizes between 270 nm and 35 μm indicates that both, deformation twinning and martensitic phase transformation are significantly retarded with increasing grain refinement. A crystal plasticity finite element model incorporating a constitutive law reflecting the grain size-controlled dislocation slip and deformation twinning captures the micromechanical behavior of the steels with different grain sizes. Comparison of simulation and experiment shows that the deformation of ultrafine-grained 304 steels is dominated by the slip of partial dislocations, whereas for coarse-grained steels dislocation slip, twinning and martensite formation jointly contribute to the shape change. © 2015 Acta Materialia Inc.
