ausblenden:
Schlagwörter:
MoVTeNb oxide; M1 phase; Propane oxidation; Acrylic acid; Adsorption; Microcalorimetry; In situ XPS; Operando; Active sites
Zusammenfassung:
The surface of a highly crystalline MoVTeNb oxide catalyst for selective oxidation of propane to acrylic acid composed of the M1 phase has been studied by infrared spectroscopy, microcalorimetry, and in situ photoelectron spectroscopy. The acid–base properties of the catalyst have been probed by NH3 adsorption showing mainly Brønsted acidity that is weak with respect to concentration and strength of sites. Adsorption of propane on the activated catalyst reveals the presence of a high number of energetically homogeneous propane adsorption sites, which is evidenced by constant differential heat of propane adsorption qdiff,initial = 57 kJ mol−1 until the monolayer coverage is reached that corresponds to a surface density of approximately 3 propane molecules per nm2 at 313 K. The decrease of the heat to qdiff,initial = 40 kJ mol−1 after catalysis implies that the surface is restructured under reaction conditions. The changes have been analyzed with high-pressure in situ XPS while the catalyst was working applying reaction temperatures between 323 and 693 K, different feed compositions containing 0 mol.% and 40 mol.% steam and prolonged reaction times. The catalytic performance during the XPS experiments measured by mass spectrometry is in good agreement with studies in fixed-bed reactors at atmospheric pressure demonstrating that the XPS results taken under operation show the relevant active surface state. The experiments confirm that the surface composition of the M1 phase differs significantly from the bulk implying that the catalytically active sites are no part of the M1 crystal structure and occur on all terminating planes. Acrylic acid formation correlates with surface depletion in Mo6+ and enrichment in V5+ sites. In the presence of steam in the feed, the active ensemble for acrylic acid formation appears to consist of V5+ oxo-species in close vicinity to Te4+ sites in a Te/V ratio of 1.4. The active sites are formed under propane oxidation conditions and are embedded in a thin layer enriched in V, Te, and Nb on the surface of the structural stable self-supporting M1 phase.
