Help Privacy Policy Disclaimer
  Advanced SearchBrowse


  Thermomechanical characterization of Portevin-Le Chatelier bands in AlMg3 (AA5754) and modeling based on a modified Estrin-McCormick approach

Klusemann, B., Fischer, G., Böhlke, T., & Svendsen, B. (2015). Thermomechanical characterization of Portevin-Le Chatelier bands in AlMg3 (AA5754) and modeling based on a modified Estrin-McCormick approach. International Journal of Plasticity, 67, 192-216. doi:10.1016/j.ijplas.2014.10.011.

Item is


show Files




Klusemann, Benjamin1, Author              
Fischer, Gottfried2, Author              
Böhlke, Thomas3, Author              
Svendsen, Bob4, 5, Author              
1Hamburg University of Technology, Institute of Continuum Mechanics and Materials Mechanics, Hamburg, Germany, ou_persistent22              
2Technische Universität Dortmund, Lehrstuhl für Werkstofftechnologie, Dortmund, Germany, ou_persistent22              
3Karlsruhe Institute of Technology (KIT), Department of Continuum Mechanics, Karlsruhe, Germany, ou_persistent22              
4Material Mechanics, Faculty of Georesources and Materials Engineering, RWTH Aachen University, Schinkelstraße 2, D-52062 Aachen, Germany , ou_persistent22              
5Microstructure Physics and Alloy Design, Max-Planck-Institut für Eisenforschung GmbH, Max Planck Society, ou_1863381              


Free keywords: Band propagation; Experimental investigations; Experimental specimens; Longitudinal propagation; Mccormick; PLC-effect; Radiation measurement methods; Thermo-mechanical characterization
 Abstract: The purpose of the current work is the experimental investigation and modeling of Portevin-Le Chatelier (PLC) band development in AlMg3 aluminum alloys, in particular in AA5754. The experimental investigation employs both mechanical and thermal (infrared) radiation measurement methods. The former involve force, displacement, and strain measurements using strain gauges. The latter employ a high-speed infrared camera to capture PLC band trajectories and evolution. In addition, the critical strain for band nucleation, as well as band characteristics such as velocity, type, and strain state, have been determined. To model the experimental results, a modification of the Estrin-McCormick model (e.g., Estrin and McCormick, 1991) due to Mike et al. (2009) is employed. In this modification, the saturation value of the Cottrell-Bilby-Louat (CBL) contribution to the effective flow stress due to dynamic strain aging is not constant, but rather is assumed to be linearly dependent on the accumulated effective inelastic strain. This model is incorporated into a finite-element model for the experimental specimens constructed with the help of convergence and mesh-sensitivity studies. Using selected mechanical test data, model parameters for AA5754 are then identified. With the identified model, a number of comparisons between experimental results and model predictions are carried out for validation purposes. Attention is focused here in particular on aspects of PLC band nucleation and propagation. Nucleation behavior is studied in particular with respect to stress gradients. It was found that the stress gradient is not the main trigger for PLC band nucleation, and is less relevant with increasing strain. The comparison of experimental and simulation results for spatio-temporal strain patterns and stress distribution shows that strong stress drops are correlated with the start of longitudinal propagation of a fully evolved PLC band. Small oscillations between large stress drops during propagation of type B bands indicate the consecutive nucleation, propagation and disappearing of these bands. The transition region from normal to inverse behavior (decreasing strain rate) denotes the transition from type A to type B. A transition with increasing strain is observed both experimentally and in the simulation. For lower strain rates and higher strains, type C bands are observed as well. Generally speaking, the band velocity decreases with decreasing strain rate and increasing strain. On the other hand, the band strain is found to increase with increasing strain, and only slightly with increasing strain rate. Simulation and experimental results, generally, show very good agreement. (C) 2015 Elsevier Ltd. All rights reserved.


Language(s): eng - English
 Dates: 2015-05
 Publication Status: Published in print
 Pages: 25
 Publishing info: -
 Table of Contents: -
 Rev. Type: -
 Degree: -



Legal Case


Project information


Source 1

Title: International Journal of Plasticity
  Abbreviation : Int. J. Plast.
Source Genre: Journal
Publ. Info: New York : Pergamon
Pages: - Volume / Issue: 67 Sequence Number: - Start / End Page: 192 - 216 Identifier: ISSN: 0749-6419
CoNE: https://pure.mpg.de/cone/journals/resource/954925544230