English
 
User Manual Privacy Policy Disclaimer Contact us
  Advanced SearchBrowse

Item

ITEM ACTIONSEXPORT
 
 
DownloadE-Mail
  Effect of titanium additions upon microstructure and properties of precipitation-strengthened Fe–Ni–Al–Cr ferritic alloys

Rawlings, M. J. S., Liebscher, C., Asta, M. D., & Dunand, D. C. (2017). Effect of titanium additions upon microstructure and properties of precipitation-strengthened Fe–Ni–Al–Cr ferritic alloys. Acta Materialia, 128, 103-112. doi:10.1016/j.actamat.2017.02.028.

Item is

Basic

show hide
Item Permalink: http://hdl.handle.net/21.11116/0000-0001-7041-7 Version Permalink: http://hdl.handle.net/21.11116/0000-0001-7042-6
Genre: Journal Article

Files

show Files

Locators

show

Creators

show
hide
 Creators:
Rawlings, Michael J. S.1, Author              
Liebscher, Christian2, 3, Author              
Asta, Mark D.4, Author              
Dunand, David C.1, Author              
Affiliations:
1Department of Materials Science & Engineering, Northwestern University, Evanston, IL, USA, persistent22              
2Advanced Transmission Electron Microscopy, Structure and Nano-/ Micromechanics of Materials, Max-Planck-Institut für Eisenforschung GmbH, Max Planck Society, ou_1863399              
3Department of Materials Science & Engineering, University of California, Berkeley, CA, USA, persistent22              
4Department of Materials Science and Engineering, University of California, Berkeley, CA 94720, USA, ou_persistent22              

Content

show
hide
Free keywords: RESISTANT STEELS; CREEP RESISTANCE; EVOLUTION; BEHAVIOR; DESIGNMaterials Science; Metallurgy & Metallurgical Engineering; Titanium; Ferritic; Superalloy; Microstructure; Hierarchical; Precipitate-strengthened; Creep; High temperature;
 Abstract: Various amounts of Ti (0, 2, 4 and 6 wt%) is added to a ferritic alloy with a nominal composition of Fe-10Cr-10Ni-6.5A1-3.4Mo-0.25Zr-0.005B (wt%) (FBB8). The microstructure and composition of the matrix and precipitate phases are characterized by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). For the Ti-modified steels, the bcc ferritic matrix is strengthened by sub micron L2(1)-Ni2TiAl-type precipitates which contain (i) Fe-inclusions with the precipitates' overall diameters ranging from 100 to 500 nm for both FBB8-4 wt%Ti and FBB8-6 wt%Ti, or (ii) B2-NiA1 sub precipitates with an average diameter of 50-100 nm for FBB8-2 wt%Ti. By contrast, the Ti-free FBB8 alloy contains B2-NiAl precipitates with Fe-inclusions. The four FBB8-Ti alloys were subjected to creep experiments at 700 degrees C in the stress range of 60-300 MPa. Threshold stresses for all studied compositions were observed, ranging from 69 to 179 MPa, with the most creep-resistant alloy being FBB8-2Ti with L2(1)/ B2 precipitates. Based on these mechanical results and detailed electron microscopy observations, the creep mechanism is rationalized to be general dislocation climb with repulsive elastic interaction between coherent precipitates and the matrix dislocations. (C) 2017 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Details

show
hide
Language(s): eng - English
 Dates: 2017-04-15
 Publication Status: Published in print
 Pages: 10
 Publishing info: -
 Table of Contents: -
 Rev. Method: Peer
 Degree: -

Event

show

Legal Case

show

Project information

show

Source 1

show
hide
Title: Acta Materialia
  Abbreviation : Acta Mater.
Source Genre: Journal
 Creator(s):
Affiliations:
Publ. Info: Kidlington : Elsevier Science
Pages: - Volume / Issue: 128 Sequence Number: - Start / End Page: 103 - 112 Identifier: ISSN: 1359-6454
CoNE: /journals/resource/954928603100