hide
Free keywords:
Laser-induced periodic surface structures; Ultrafast laser processing; Thin metallic film; Oxidation; Surface electromagnetic wave; Optical feedback mechanism
Abstract:
Thin Cr films 28-nm thick deposited on glass substrates were processed by scanning low-intensity femtosecond laser pulses with energy well below single-pulse damage threshold. Two types of laser-induced periodic surface structures (LIPSS) were produced, depending on the scanning velocity, (1) parallel to laser light polarization with periodicity somewhat smaller than laser wavelength and (2) perpendicular to polarization with spatial period much smaller than wavelength. All structures are formed as protrusions above the initial film surface and exhibit a high degree of oxidation. To explain formation of the LIPSS and their conversion from one to another type, a rigorous numerical approach for modeling surface electromagnetic waves in thin-film geometry has been developed, which takes into account the change of optical properties of material due to laser-induced oxidation and porosity. The approach addresses the multiplicity of electromagnetic modes allowed for thin films. It has been found that the low spatial frequency LIPSS parallel to laser polarization, which are formed at low scanning velocities, are well described by the Sipe theory for surfaces of low roughness. The SEW mode responsible for high spatial frequency LIPSS formation at high scanning velocities has been identified. The mechanisms of optical feedback and transformation between types of LIPSS with scanning velocity have been proposed.
