English
 
Help Privacy Policy Disclaimer
  Advanced SearchBrowse

Item

ITEM ACTIONSEXPORT
  Morphology Controlled High-Surface Area Suppoprt Materials for Electrochemical Applications

Jalalpoor, D. (2018). Morphology Controlled High-Surface Area Suppoprt Materials for Electrochemical Applications. PhD Thesis, Ruhr-Universität, Bochum.

Item is

Files

show Files

Locators

show

Creators

show
hide
 Creators:
Jalalpoor, Daniel1, Author           
Affiliations:
1Research Department Schüth, Max-Planck-Institut für Kohlenforschung, Max Planck Society, ou_1445589              

Content

show
hide
Free keywords: -
 Abstract: Fuel cells and electrolyzers will most probably be an important cornerstone in the future energy
system, often addressed as “hydrogen economy”, if hydrogen is used as an energy carrier.
Polymer electrolyte membrane (PEM) based systems work in the acidic environment of the
polymer membrane, which restricts the scope of catalyst materials to noble metals. The
efficiency of the overall reaction is mostly defined by the sluggish kinetics of the oxygen half
reaction, i.e. oxygen reduction or oxygen evolution reaction, respectively (ORR/OER). Typically
platinum or platinum alloys are used in PEM fuel cells, while iridium oxides are common
catalysts for PEM electrolyzers. The scarcity of those materials calls for strategies to reduce the
overall catalyst amounts. Support materials allow an improved dispersion of the catalyst and
additionally might enhance their stability, durability and activity. Specifications of the support
materials are sufficient electrical conductivity, stability in acidic conditions and durability in
oxidizing environments. Commonly applied carbon supports suffer from severe carbon corrosion
especially at higher potentials, preventing their use in OER. A number of possible support
materials have been suggested both for OER and ORR catalysts. Among these, this study is
mainly focused on antimony tin oxide (ATO).
A facile and versatile salt-melt, hard-templating method for high-surface area ATO was
developed. This new method allows adjusting the morphology, particle and pore sizes as well as
the doping concentration with a previously unknown degree of control. The method was used to
study the segregation behavior of antimony in spherical mesoporous ATO as a function of the
antimony dopant concentration and the synthesis temperature. Additionally the electrochemical
stability in terms of antimony and tin dissolution of various ATO materials was tested and
correlated to the preparation conditions. This allowed determining a stable potential window of
ATO showing the crucial importance of preventing a reduction of the ATO support at potentials
below 0.3 VRHE. Additionally, a pretreatment protocol was suggested to reduce chemical
antimony dissolution from the samples.
The developed ATO materials were applied as support materials for IrOx catalysts. Extended
characterization led to the conclusion that iridium forms mixed oxides with the ATO support. At
the same time, probably due to the stabilization of Ir(IV) in the SnO2 lattice, this allows the
preparation of highly oxidized catalysts at surprisingly low temperatures. The activity and
stability of the catalyst materials was extensively studied, and trends as a function of the
synthesis temperature and the respective oxidation state were derived. The application of the
stability number allowed the estimation of the intrinsic stability and the lifetime of the catalyst.
It was shown that catalyst materials with iridium oxidation states below Ir(IV) have low stability
numbers and therefore suffer from significant degradation. This generally questions the
applicability of any non-highly oxidized iridium catalysts in real applications.
A number of high-surface area support materials with different antimony concentrations were
also used to support platinum catalysts. Determination of the role and impact of antimony on
the performance and stability of the ATO supported platinum catalysts was elucidated. Strong
metal-support interactions lead to the coverage of platinum particles with antimony, especially
in a reductive atmosphere. At high antimony dopant concentration also platinum/antimony
alloys are formed at low temperatures. This interaction has, on the one hand, a major impact on
the performance of the catalyst and significantly reduces the electrochemically active surface
area (ECSA) and the mass activity. On the other hand it leads to a stabilization of the catalyst by
protecting parts of the catalyst surface. Performance tests in a membrane electrode assembly
reveal the dissolution and penetration of antimony into the polymer membrane, which may
poison the membrane and alter its conductivity.
Besides ATO, high-surface area Ti4O7, TiN and SiC were tested as alternative support materials. In
the case of Ti4O7, likewise to ATO, strong metal-support interactions lead to the coverage of a
significant share of the catalyst surface. This decreases both the ECSA and the mass activity,
while not influencing the specific activity of the remaining active sites. An application of a highsurface
area Ti4O7 material is, at least if prepared with the here applied method, despite its high
stability against dissolution, in doubt due to its rapid oxidation. Synthesis strategies for highsurface
area TiN and SiC materials were developed, though the materials were not further
investigated due to limited stability against oxidation and low conductivity.
In general the applicability of the here tested high-surface area metal oxides, nitrides and
carbides is limited by their stability. An exception is antimony tin oxide. Especially as a support
material for OER, ATO has a significant advantage over carbon, other metal oxides and nitrides,
as it is stable at high potentials and does not lose its conductivity, if reduction of the material
can be prevented. The interaction with most common catalyst materials for ORR and OER with antimony leads to significant changes in the properties and performance of the catalysts.
Nevertheless, ATO, but also the related fluorine doped tin oxide and indium tin oxide, are promising candidates as support materials for OER catalysts in PEM electrolyzers.

Details

show
hide
Language(s): eng - English
 Dates: 2018-12-052018-12-05
 Publication Status: Published in print
 Pages: 119
 Publishing info: Bochum : Ruhr-Universität
 Table of Contents: -
 Rev. Type: -
 Identifiers: DOI: 10.13154/294-6241
 Degree: PhD

Event

show

Legal Case

show

Project information

show

Source

show