Deutsch
 
Hilfe Datenschutzhinweis Impressum
  DetailsucheBrowse

Datensatz

DATENSATZ AKTIONENEXPORT

Freigegeben

Zeitschriftenartikel

Structural evolution in reactive RF magnetron sputtered (Cr,Zr)2O3 coatings during annealing

MPG-Autoren
/persons/resource/persons195051

Alling,  Björn
Adaptive Structural Materials (Simulation), Computational Materials Design, Max-Planck-Institut für Eisenforschung GmbH, Max Planck Society;
Department of Physics, Chemistry and Biology (IFM), Thin Film Physics Division, Linköping University, Linköping, Sweden;

Externe Ressourcen
Es sind keine externen Ressourcen hinterlegt
Volltexte (beschränkter Zugriff)
Für Ihren IP-Bereich sind aktuell keine Volltexte freigegeben.
Volltexte (frei zugänglich)
Es sind keine frei zugänglichen Volltexte in PuRe verfügbar
Ergänzendes Material (frei zugänglich)
Es sind keine frei zugänglichen Ergänzenden Materialien verfügbar
Zitation

Landälv, L., Lu, J., Spitz, S., Leiste, H., Ulrich, S., Johansson-Jöesaar, M. P., et al. (2017). Structural evolution in reactive RF magnetron sputtered (Cr,Zr)2O3 coatings during annealing. Acta Materialia, 131, 543-552. doi:10.1016/j.actamat.2017.03.063.


Zitierlink: https://hdl.handle.net/21.11116/0000-0001-702A-2
Zusammenfassung
Reactive RF-magnetron sputtering is used to grow Cr0.28Zr0.10O0.61 coatings at 500 °C. Coatings are annealed at 750 °C, 810 °C, and 870 °C. The microstructure evolution of the pseudobinary oxide compound is characterized through high resolution state of the art HRSTEM and HREDX-maps, revealing the segregation of Cr and Zr on the nm scale. The as-deposited coating comprises α-(Cr,Zr)2O3 solid solution with a Zr-rich (Zr,Cr)Ox amorphous phase. After annealing to 750 °C tetragonal ZrO2 nucleates and grows from the amorphous phase. The ZrO2 phase is stabilized in its tetragonal structure at these fairly low annealing temperatures, possibly due to the small grain size (below ∼30 nm). Correlated with the nucleation and growth of the tetragonal-ZrO2 phase is an increase in hardness, with a maximum hardness after annealing to 750 °C, followed by a decrease in hardness upon coarsening, bcc metallic Cr phase formation and loss of oxygen during annealing to 870 °C. The observed phase segregation opens up future design routes for pseudobinary oxides with tunable microstructural and mechanical properties. © 2017 Acta Materialia Inc.