Datensatz

Zusammenfassung

Double submerged arc welding is an efficient process used during the production of longitudinally-welded large-diameter pipes. It is well known that the associated high heat input has a negative influence on the toughness of the heat-affected zone (HAZ). The toughness drop is related to changes in the HAZ microstructure compared to the base metal. The austenite grain size increases significantly and larger carbon-rich martensite/austenite particles (M/A-particles) are formed within a coarse bainitic matrix during the phase transformation compared to the as-rolled base material. The exact relationship between the microstructure, the processing conditions, base metal composition and the weld metal are at the focus of attention of materials development efforts at EUROPIPE and Salzgitter Mannesmann Forschung GmbH (SZMF). In the present study, scanning electron microscopy (SEM) and electron backscatter diffraction (EBSD) were used to investigate the HAZ of X70 large-diameter pipe material as well as tested Charpy specimens from the same material. Secondary cracks in the direct vicinity of the primary fracture surface of tested Charpy specimens from the HAZ were analyzed by EBSD and SEM to investigate the damage mechanism in detail. It was found that these cracks originate at M/A-particles and that the dominant crack path depends on the crystallographic orientation of the surrounding matrix. The analysis of several EBSD measurements and a 3D-analysis of the propagation direction of the crack showed that secondary cracks frequently propagate parallel to 100} and rarely along {110-planes. It is known from literature that these are preferred cleavage planes in ferritic steels. The SEM analysis performed in the HAZ of the investigated steel showed that the volume fraction of elongated M/A-particles is elevated close to the fusion line and decreases within the first few hundred micrometers distance from the fusion line. The EBSD measurements illustrate that the geometrically necessary dislocation density is significantly increased in the neighborhood of M/A-particles. This indicates that the bainitic matrix is work-hardened around the M/A-particles during testing and is therefore more prone to the formation of microcracks than other surrounding regions. Copyright © 2018 ASME