date: 2021-02-09T14:30:24Z
pdf:unmappedUnicodeCharsPerPage: 17
pdf:PDFVersion: 1.7
pdf:docinfo:title: Lath Martensite Microstructure Modeling: A High-Resolution Crystal Plasticity Simulation Study
xmp:CreatorTool: LaTeX with hyperref
Keywords: packet; block; subblock; lath; steel
access_permission:modify_annotations: true
access_permission:can_print_degraded: true
subject: Lath martensite is a complex hierarchical compound structure that forms during rapid cooling of carbon steels from the austenitic phase. At the smallest, i.e., `single crystal' scale, individual, elongated domains, form the elemental microstructural building blocks: the name-giving laths. Several laths of nearly identical crystallographic orientation are grouped together to blocks, in which?depending on the exact material characteristics?clearly distinguishable subblocks might be observed. Several blocks with the same habit plane together form a packet of which typically three to four together finally make up the former parent austenitic grain. Here, a fully parametrized approach is presented which converts an austenitic polycrystal representation into martensitic microstructures incorporating all these details. Two-dimensional (2D) and three-dimensional (3D) Representative Volume Elements (RVEs) are generated based on prior austenite microstructure reconstructed from a 2D experimental martensitic microstructure. The RVEs are used for high-resolution crystal plasticity simulations with a fast spectral method-based solver and a phenomenological constitutive description. The comparison of the results obtained from the 2D experimental microstructure and the 2D RVEs reveals a high quantitative agreement. The stress and strain distributions and their characteristics change significantly if 3D microstructures are used. Further simulations are conducted to systematically investigate the influence of microstructural parameters, such as lath aspect ratio, lath volume, subblock thickness, orientation scatter, and prior austenitic grain shape on the global and local mechanical behavior. These microstructural features happen to change the local mechanical behavior, whereas the average stress?strain response is not significantly altered. Correlations between the microstructure and the plastic behavior are established.
dc:creator: Francisco-José Gallardo-Basile, Yannick Naunheim, Franz Roters, Martin Diehl
dcterms:created: 2021-02-08T08:27:27Z
Last-Modified: 2021-02-09T14:30:24Z
dcterms:modified: 2021-02-09T14:30:24Z
dc:format: application/pdf; version=1.7
title: Lath Martensite Microstructure Modeling: A High-Resolution Crystal Plasticity Simulation Study
Last-Save-Date: 2021-02-09T14:30:24Z
pdf:docinfo:creator_tool: LaTeX with hyperref
access_permission:fill_in_form: true
pdf:docinfo:keywords: packet; block; subblock; lath; steel
pdf:docinfo:modified: 2021-02-09T14:30:24Z
meta:save-date: 2021-02-09T14:30:24Z
pdf:encrypted: false
dc:title: Lath Martensite Microstructure Modeling: A High-Resolution Crystal Plasticity Simulation Study
modified: 2021-02-09T14:30:24Z
cp:subject: Lath martensite is a complex hierarchical compound structure that forms during rapid cooling of carbon steels from the austenitic phase. At the smallest, i.e., `single crystal' scale, individual, elongated domains, form the elemental microstructural building blocks: the name-giving laths. Several laths of nearly identical crystallographic orientation are grouped together to blocks, in which?depending on the exact material characteristics?clearly distinguishable subblocks might be observed. Several blocks with the same habit plane together form a packet of which typically three to four together finally make up the former parent austenitic grain. Here, a fully parametrized approach is presented which converts an austenitic polycrystal representation into martensitic microstructures incorporating all these details. Two-dimensional (2D) and three-dimensional (3D) Representative Volume Elements (RVEs) are generated based on prior austenite microstructure reconstructed from a 2D experimental martensitic microstructure. The RVEs are used for high-resolution crystal plasticity simulations with a fast spectral method-based solver and a phenomenological constitutive description. The comparison of the results obtained from the 2D experimental microstructure and the 2D RVEs reveals a high quantitative agreement. The stress and strain distributions and their characteristics change significantly if 3D microstructures are used. Further simulations are conducted to systematically investigate the influence of microstructural parameters, such as lath aspect ratio, lath volume, subblock thickness, orientation scatter, and prior austenitic grain shape on the global and local mechanical behavior. These microstructural features happen to change the local mechanical behavior, whereas the average stress?strain response is not significantly altered. Correlations between the microstructure and the plastic behavior are established.
pdf:docinfo:subject: Lath martensite is a complex hierarchical compound structure that forms during rapid cooling of carbon steels from the austenitic phase. At the smallest, i.e., `single crystal' scale, individual, elongated domains, form the elemental microstructural building blocks: the name-giving laths. Several laths of nearly identical crystallographic orientation are grouped together to blocks, in which?depending on the exact material characteristics?clearly distinguishable subblocks might be observed. Several blocks with the same habit plane together form a packet of which typically three to four together finally make up the former parent austenitic grain. Here, a fully parametrized approach is presented which converts an austenitic polycrystal representation into martensitic microstructures incorporating all these details. Two-dimensional (2D) and three-dimensional (3D) Representative Volume Elements (RVEs) are generated based on prior austenite microstructure reconstructed from a 2D experimental martensitic microstructure. The RVEs are used for high-resolution crystal plasticity simulations with a fast spectral method-based solver and a phenomenological constitutive description. The comparison of the results obtained from the 2D experimental microstructure and the 2D RVEs reveals a high quantitative agreement. The stress and strain distributions and their characteristics change significantly if 3D microstructures are used. Further simulations are conducted to systematically investigate the influence of microstructural parameters, such as lath aspect ratio, lath volume, subblock thickness, orientation scatter, and prior austenitic grain shape on the global and local mechanical behavior. These microstructural features happen to change the local mechanical behavior, whereas the average stress?strain response is not significantly altered. Correlations between the microstructure and the plastic behavior are established.
Content-Type: application/pdf
pdf:docinfo:creator: Francisco-José Gallardo-Basile, Yannick Naunheim, Franz Roters, Martin Diehl
X-Parsed-By: org.apache.tika.parser.DefaultParser
creator: Francisco-José Gallardo-Basile, Yannick Naunheim, Franz Roters, Martin Diehl
meta:author: Francisco-José Gallardo-Basile, Yannick Naunheim, Franz Roters, Martin Diehl
dc:subject: packet; block; subblock; lath; steel
meta:creation-date: 2021-02-08T08:27:27Z
created: 2021-02-08T08:27:27Z
access_permission:extract_for_accessibility: true
access_permission:assemble_document: true
xmpTPg:NPages: 19
Creation-Date: 2021-02-08T08:27:27Z
pdf:charsPerPage: 4008
access_permission:extract_content: true
access_permission:can_print: true
meta:keyword: packet; block; subblock; lath; steel
Author: Francisco-José Gallardo-Basile, Yannick Naunheim, Franz Roters, Martin Diehl
producer: pdfTeX-1.40.21
access_permission:can_modify: true
pdf:docinfo:producer: pdfTeX-1.40.21
pdf:docinfo:created: 2021-02-08T08:27:27Z